
Most commercial solar panels installed in the UK today are 550W to 600W modules measuring about 2.2 to 2.4 metres long and 1.1 to 1.3 metres wide. Each one weighs roughly 28 to 35kg. A typical home solar panel is smaller, at around 1.7 metres by 1.1 metres.
Panel size matters for three things on a business roof: how many panels fit, how much weight the roof carries, and how the installers get the panels up there safely.
What size is a commercial solar panel?
A standard 600W commercial solar panel measures 2,172mm by 1,303mm, or about 2.8 square metres. Newer TOPCon panels of similar wattage tend to be longer and narrower, at around 2,280mm to 2,380mm by 1,134mm.
| Panel example | Rating | Dimensions (mm) | Area | Weight |
|---|---|---|---|---|
| Canadian Solar HiKU7 (mono PERC) | 600W | 2,172 × 1,303 × 35 | 2.83m² | 31kg |
| Trina Solar Vertex (mono PERC) | 600W | 2,172 × 1,303 × 40 | 2.83m² | 35.3kg |
| Canadian Solar CS6.2-66TB (TOPCon) | 600W | 2,382 × 1,134 | 2.70m² | not listed |
| ARTsolar 144-cell (TOPCon) | 600W | 2,279 × 1,134 × 30 | 2.58m² | 28kg |
| Typical residential panel | 410–455W | about 1,700–1,760 × 1,000–1,134 | 1.7–2.0m² | about 21kg |
Always check the datasheet for the exact panel your installer quotes. Two 600W panels from different makers can differ by 200mm in length.
How do commercial solar panel sizes compare with residential panels?
Commercial solar panels are about 40% larger than residential panels by area. A home panel usually covers around 1.7 to 2.0 square metres, while a commercial panel covers 2.6 to 2.8 square metres. The larger panel holds more cells, so it produces more power: 550W to 600W against roughly 410W to 455W for a home panel.
The cells themselves are the same kind of technology. Commercial panels just pack more of them into one frame. Our guide to how commercial and residential solar systems differ covers the other differences.
How much roof space does a commercial solar system need?
A commercial solar system needs about 4.7 square metres of panel area for every kilowatt peak (kWp) when it uses 600W panels. The usable roof area needs to be larger still, because designers leave room for walkways, roof edges, rooflights, plant and fire breaks. Good flat-roof design allows for safe access for maintenance, fire breaks around rooftop plant and rooflights, and wind load zones.
| System size | Panels at 600W | Panel area only |
|---|---|---|
| 10kWp | 17 | about 48m² |
| 50kWp | 84 | about 238m² |
| 100kWp | 167 | about 473m² |
| 250kWp | 417 | about 1,180m² |
| 500kWp | 834 | about 2,360m² |
Flat roofs with tilted rows need more space again, because each row must sit far enough back to avoid shading the next. East-west layouts fit more panels on a flat roof by placing rows back to back. Once you know the space, our commercial solar ROI calculator estimates output and payback for that system size.
How much do commercial solar panels weigh?
A commercial solar panel weighs between about 28kg and 35kg. Spread across the roof, a complete system adds roughly 13kg per square metre on a pitched or profiled metal roof. Ballasted systems on flat roofs add more, typically 12 to 20kg per square metre, because concrete blocks hold the frames down instead of fixings.
A structural engineer should check any commercial roof before panels go on. Under the MCS standard MIS 3002, which covers certified systems up to 50kWp, ballasted flat-roof systems need a structural engineer to verify the design. Our guide to whether your roof suits commercial solar explains the checks.
Why are commercial solar panels bigger than home panels?
Commercial solar panels are bigger because fewer, larger panels cut installation time and parts per kilowatt. A 100kWp array needs 167 panels at 600W but about 230 panels at 440W. Fewer panels means fewer clamps, rail joints, connectors and cable runs, which lowers labour cost and reduces the number of points that can fail.
Large-format panels also suit big, open roofs and ground arrays. They are awkward to handle on most home roofs, which is why domestic installers stick with smaller modules.
When are smaller solar panels the better choice for a business?
Smaller solar panels suit business roofs that are broken up by rooflights, vents, dormers or plant. A smaller module fits into tight sections where a 2.3-metre panel won’t, so the roof can carry more total capacity. They also suit pitched roofs on older commercial buildings, small units and offices where installers carry panels up by hand.
Solar carports use their own panel layouts to suit the canopy frame. See our solar carports page for details.
Commercial solar panel size FAQs
What are commercial solar panel dimensions in feet?
A standard 600W commercial solar panel measures about 7 feet 1 inch long by 4 feet 3 inches wide (2,172mm by 1,303mm).
How many commercial solar panels do I need for 100kW?
A 100kW solar system needs 167 panels rated at 600W, or 182 panels rated at 550W.
Are bigger solar panels more efficient?
No. A bigger panel produces more watts, but efficiency measures output per square metre, so a large panel isn’t automatically more efficient. Our guide to commercial solar panel efficiency compares panel types.
Which type of commercial solar panel is best?
The best commercial solar panel depends on your roof, budget and space. Our guide to the best types of solar panels for commercial buildings compares the options.
Find out what fits on your roof
We measure your roof, check its structure and design a layout around the panels that fit it best. Book a free roof assessment, or see how we work with warehouses and factories. You can see everything we install on our commercial solar services page.

