Commercial Solar Installations Nationwide

The Commercial Solar Company

Tel: 0333 049 7581

Mon–Fri 9 AM – 5 PM, Sat 9 AM – 1 PM

MCS Certified Installation

Future Proof Your Business

Nationwide Coverage

Commercial solar advice and guides from The Commercial Solar Company

Dynamic load management in EV charging is what lets a business install ten chargers on a supply that could only run three at full power. Combined with OCPP, the open standard most networked chargers use, it turns a row of chargers into a managed system.

This guide explains both in plain terms, and how they work with solar and battery storage.

The problem: chargers add up fast

A 7kW charger draws about the same as two or three kettles running continuously. A 22kW charger draws about three times that. Plug in ten cars at once and a typical commercial supply can quickly run out of headroom.

Upgrading the supply is not always quick or cheap. Cenex guidance gives approximate connection costs from £1,000 to £3,000 for small sites up to £60,000 to £2 million, with six months or more of lead time, for large depots (Cenex BETT guidance, accessed November 2026).

What is load management?

Load management controls how much power chargers can draw so the total stays within a set limit.

Static load management

Static load management sets a fixed limit for the chargers, for example 50kW shared between all of them. It is simple, but it cannot respond to what the rest of the building is using.

Dynamic load management

Dynamic load management measures the site’s total demand in real time, usually with a meter or current clamp at the incoming supply. When the building uses less, chargers get more. When the building is busy, chargers are turned down.

The result is that more chargers can share the same supply without tripping it, and vehicles still get as much power as the site can spare.

Prioritisation

Good systems can also prioritise: fleet vehicles due out first, a manager’s pool car, or a rapid charger for visitors. Others charge more slowly in the background.

What is OCPP?

The Open Charge Point Protocol (OCPP) is an open communication standard between chargers and the software that manages them, often called the back office or charge point management system.

Because it is open, chargers and software from different suppliers can work together. That gives you more choice and makes it easier to change software provider later without replacing hardware.

What OCPP software can do

  • Control who can charge, using RFID cards or apps.
  • Set tariffs for staff, visitors or the public.
  • Report energy use per vehicle, driver or site.
  • Spot faults and reset chargers remotely.
  • Apply smart charging schedules and power limits.
  • Share data with fleet and finance systems.

Smart charging rules

Under the Electric Vehicles (Smart Charge Points) Regulations 2021, home and workplace chargepoints sold in Great Britain must have smart functionality. Rapid chargers of 50kW and above are excluded (legislation.gov.uk).

If chargers are open to the public, the Public Charge Point Regulations 2023 add requirements such as contactless payment on new chargers of 8kW and above and a 24/7 helpline (GOV.UK guidance).

Adding solar and battery storage

Load management becomes more powerful when it knows what your solar panels and battery are doing.

  • Solar-aware charging. When solar panels generate more than the building needs, chargers can speed up to use the surplus instead of exporting it.
  • Battery support. A battery can discharge during busy periods so chargers keep running without exceeding the supply limit.
  • Off-peak charging. Chargers and batteries can take power when tariffs are cheapest, then use it later.
  • Peak shaving. Keeping the site’s peak demand down can help you avoid or reduce a supply upgrade.

This is the thinking behind our solar EV charging bundle.

Where load management matters most

Questions to ask when planning chargers

  1. What is our supply capacity, and how much is spare at peak times?
  2. Does the proposed system use dynamic or static load management?
  3. Are the chargers OCPP-compliant, and can we change software provider later?
  4. Can the system read our solar and battery data?
  5. How are vehicles prioritised?
  6. Who monitors faults and keeps software updated?

Ongoing support is covered on our EV charger maintenance page.

Grants and tax relief (checked 10 November 2026)

The Workplace Charging Scheme covers up to 75% of costs, capped at £500 per socket and 40 sockets, for installations completed from 1 April 2026, until 31 March 2027. New chargepoint equipment also qualifies for a 100% first-year allowance until 31 March 2027. See the EV charger grants guide.

Next steps

Find out more about commercial EV charging, see the industries we work with, or model costs with the solar and EV calculator and the commercial solar ROI calculator.

Frequently asked questions

What is dynamic load management for EV charging?

It measures your site’s total electricity demand in real time and adjusts charger power so the total stays within your supply limit. Chargers get more power when the building uses less.

What is OCPP?

The Open Charge Point Protocol is an open standard that lets chargers talk to management software. It allows hardware and software from different suppliers to work together.

Can load management avoid a grid upgrade?

Often it can reduce or delay one, by letting more chargers share your existing supply. Very large installations may still need an upgrade.

Does load management slow down charging?

It can reduce charging speed at busy times, but vehicles still charge, and priorities can make sure the most urgent vehicles are ready first.

Can load management use solar power?

Yes. Solar-aware systems can increase charging when solar generation exceeds building demand, so more of your own power goes into vehicles.

Do workplace chargers have to be smart?

Under the Smart Charge Points Regulations 2021, home and workplace chargepoints sold in Great Britain must have smart functionality. Rapid chargers of 50kW and above are excluded.

Plan a managed charging system

Tell us about your site, your vehicles and when they park. We will look at your supply, your roof and your options, then send a clear, no-obligation proposal.